Octo Air Frame on the Cheap (cont.(cont.(cont.)))

Here are all of the electronics wired together for a test. I was able to calibrate all of the ESCs this way, and everything seems to be working at this point!

It's just about finished here. All I need to add are the lights and FPV camera. Later I'll swap the arms for longer ones, this will accommodate the new 15-inch props I ordered.

And here is the FPV camera housing I just finished printing.

It's large because I wanted the camera to have a good lens that can focus as well as zoom.

One more ugly glamour shot in the folded position without battery.